WiFi
Nexx Garage - How to connect Nexx device to an extender?
To connect the Nexx Garage to your extender, you will need to redo the setup. Make sure that your extender is broadcasting a 2.4GHz WiFi signal. You will need to reset the device and reconfigure it on your extender's WiFi name. To reset, just hold ...
Nexx Garage - NXG-200, NXG-100 - Can't connect or can't see the Nexx Garage WiFi during setup
When you are doing the set up and reach the part where the app is asking you to connect to the Nexx Garage WiFi, but you can't find or see the Nexx Garage WiFi. Then please follow the steps below: 1. Make sure that the device is on a solid green ...
Does Nexx devices require WiFi connection?
Yes. the Nexx devices will only work when connected to an internet-enabled WiFi. We recommend connecting to a home or personal router. Please note that Nexx Garage does not support 5Ghz WiFi, only 2.4Ghz.
Nexx Garage NXG-200, NXG-100 - The LED light on the Nexx Garage just keeps blinking
The blinking green and red light indicates that the device is trying to connect to your WiFi. If the device successfully connects, it should turn solid red. However, if the light continue to blink red and green, then this can either mean that the ...
Nexx Garage NXG-200, NXG-100 - What to do when you switch to the Nexx Garage WiFi and it shows "Connected, No Internet"
When doing the setup and you see this message on your phone, all you need to do is: For Android: Check for any notifications asking you if you want to stay connected and make sure you select "stay connected'. Then go back to the Nexx Home app to ...
Nexx Garage - NXG - Red Led Light
When the device turns solid red at the end of the setup, this means that the device has successfully connected to WiFi. This also means that the device is on the latest firmware. Just select "the green light is OFF" then proceed with the setup.