Setup/Configuration
Nexx Garage NXG-200 - Installation Guide
Attached document: Nexx Garage NXG-200 Installation Guide Installation Guide Topics: - Compatibility check - Box contents - Mobile Nexx Home App installation - Account creation - Device check and adding to App - Sensor paring - Device connection - ...
Nexx Garage - NXG-200 - Configuration tips for fast blinking blue LED connection issue
First make sure that you are connecting the Nexx device to a 2.4 Ghz WiFi network, as Nexx will not connect to a 5 Ghz network. After tapping "Configure Device", you will need to wait a few minutes for the device to try and connect to WiFi before ...
Nexx Garage - NXG-200 - No devices found in configuration mode error
If you get an error saying there are "no devices found in configuration mode", follow the steps below to resolve it: 1. First, delete the device from the Nexx app. On the main screen in the Nexx app, go to the Device Settings page (tap the gear ...
Nexx Garage - NXG-200 - How to update firmware
1. Open Nexx Home, tap Settings, then tap Device Info. Tap on the Local Firmware update link. Once the link is tapped, an orange LED light should show indicating the device in config mode. 2. Go to the mobile device WiFi list, and there should be an ...
Nexx Garage NXG-200 - Shared user unable to activate the door for Nexx Garage NXG-200
If a shared user was already granted access but is unable to activate the door or they get an error message saying "you can only activate the device from Bluetooth only" you'll need to check the Just Share screen on the primary user's account to see ...
NXG-200 Box Contents
Nexx Garage NXG-200 box contents includes the main device, wireless sensor, battery, stickers, wires, and installation manual.