WiFi
Nexx Garage NXG-200, NXG-100, Nexx Plug - Can't connect to WiFi or LED light doesn't stop blinking during setup
If LED light doesn't stop blinking during setup, then that indicates that your device is having issue with connecting to WiFi. Follow the steps below to resolve it: 1. Go to your phone's WiFi setting, and tap on your Home WiFi and select forget ...
Nexx Garage NXG-200, NXG-100 - Troubleshooting Connection Issues
• If you are using a Samsung or a Pixel phone there is a feature where it will block access to a WiFi network that does not have internet access and will turn on your mobile data instead. Once you connect to the Nexx Garage WiFi if you get a prompt ...
Nexx Garage NXG-100, NXG-200, Nexx Gate - WiFi Disconnect
If your device has lost WiFi connection, it will normally reconnect, but if it doesn't then please recycle the power as follows: Unplug the power for the Nexx device, wait 5 seconds, and plug the power cord back into the outlet. Also, check to see ...
Nexx Garage NXG-100 - WiFi Configuration Change due to WiFi Network Change
If your WiFi network changes, you will need to change your device WiFi configuration. Steps to change WiFi Configuration: 1. Make sure you are on your home 2.4 G WiFi network. 2. Make sure that your device LED light is solid green. If it's not, then ...
Nexx App - NXG-100 - PC Configuration for Nexx home
Configuring the device through a WiFi-enabled PC/Laptop/Tablet: 1. Take the device inside the house near a computer and power it up. The led light should be solid green 2. From a browser on a computer, go to this URL: https://mobile.nexxhome.com/ 3. ...