Nexx Garage NXG-100 - WiFi Configuration Change due to WiFi Network Change
If your WiFi network changes, you will need to change your device WiFi configuration.
Steps to change WiFi Configuration:
1. Make sure you are on your home 2.4 G WiFi network.
2. Make sure that your device LED light is solid green. If it's not, then press and hold the reset button until the LED light turns solid green. This can take up to 1 minute.
3. Access the app menu (the 3 little bars at the upper left corner)>Registered Devices>tap your device>Change WiFi Configuration>Update WiFi Configuration popup message saying that the device will be reset to factory default and you will need to go through WiFi setup again>Yes>Follow the on-screen wizard instructions to set up WiFi
Related Articles
Nexx Garage NXG-100 - How to change WiFi settings in the Nexx Home app?
If your WiFi network changes, you will need to change your device WiFi configuration. Steps to change WiFi Configuration: 1. Make sure you are on your home 2.4 GHz WiFi network. 2. Make sure that your device LED light is solid green. If it's not, ...
Nexx Garage - NXG-200, NXG-100 - How to clone your garage door or gate remote with Nexx Adapter for incompatible openers
STANDARD PROGRAMMING STEPS Note : “Source Remote” = The original or universal remote you currently use on the Door or Gate. If the following steps are carried out near the opener, the remote control will activate your garage door during programming. ...
Nexx Garage NXG-100, NXG-200, Nexx Gate - WiFi Disconnect
If your device has lost WiFi connection, it will normally reconnect, but if it doesn't then please recycle the power as follows: Unplug the power for the Nexx device, wait 5 seconds, and plug the power cord back into the outlet. Also, check to see ...
Nexx Garage - NXG - Device not configuring, using Mesh network.
Some mesh networks don't allow you to split the main WiFi network into two (2.4 GHz and 5 GHz) but it should still allow you to create a guest network that is only on 2.4 GHz. Also if you have the option, try lowering down the transmit power of the 5 ...
Nexx Garage NXG-200, NXG-100 - Troubleshooting Connection Issues
• If you are using a Samsung or a Pixel phone there is a feature where it will block access to a WiFi network that does not have internet access and will turn on your mobile data instead. Once you connect to the Nexx Garage WiFi if you get a prompt ...