Nexx Garage - NXG - Red Led Light
When the device turns solid red at the end of the setup, this means that the device has successfully connected to WiFi. This also means that the device is on the latest firmware. Just select "the green light is OFF" then proceed with the setup.
Related Articles
Nexx Garage NXG-200, NXG-100 - The LED light on the Nexx Garage just keeps blinking
The blinking green and red light indicates that the device is trying to connect to your WiFi. If the device successfully connects, it should turn solid red. However, if the light continue to blink red and green, then this can either mean that the ...
Nexx Garage - NXG-200, NXG-100 - Device not responding when using the Nexx Home app
If your Nexx Garage device is not responding when you try to control it with the Nexx Home app, follow the steps below to resolve the issue: 1. Check the LED light on the device and make sure it's not blinking. 2. Restart the device by unplugging the ...
Nexx garage NXG-100 - Is Sensor Working?
Perform this test to verify if the sensor is working correctly: 1. Connect the sensor to the Nexx Garage device. 2. Power on the device. 3. Take the sensors, one in each hand, and touch them together while looking at the device. The green led ...
Nexx Garage - NXG-200, NXG-100 - How to resolve incorrect door status sensor issues
For Nexx Garage NXG-100 1. Make sure that your sensors are installed using the recommended setup. Please check the picture below for reference: 2. If the sensor is installed like in the picture above, then open your Nexx Home app, tap on Settings, ...
Nexx Garage NXG-200, NXG-100 - Troubleshooting Connection Issues
• If you are using a Samsung or a Pixel phone there is a feature where it will block access to a WiFi network that does not have internet access and will turn on your mobile data instead. Once you connect to the Nexx Garage WiFi if you get a prompt ...