Nexx Plug - How to reset Nexx Plug

• Related Articles

• Nexx Plug NXPG-100 - How to reset the Nexx plug back to configuration mode?

  Please follow the steps below to reset Nexx Plug back to the configuration mode: 1. Press and hold down the on/off button for 15 to 20 seconds or until the LED light turns solid Blue. 2. After that, go back into the Nexx Home App and start the set up ...

• Nexx Plug - Setup and configuration

  1. Download and install the Nexx Home app. 2. Make sure your phone is connected to your 2.4Ghz Home WiFi. If you have both 2.4GHz and 5GHz under one WiFI name, please check with your router or your ISP support on how to separate the two bands into ...

• Nexx Garage - NXG-100 - Hard Reset / Reset to Factory settings

  Try the following steps to perform the hard reset: 1.  Unplug the device for 30 seconds. 2.  Press and hold the reset button while plugging the device in. 3.  Continue to hold the reset button for 5-10 seconds after plugging the device in. 4.  ...

• Nexx Garage - NXG - How to reset the device back to configuration mode?

  Soft Reset 1. Press and hold down the reset button for 30-45 secs or until the led light turns solid green. 2. Unplug the power cord and wait 1 minute, before plugging it back in. After plugging the power back in, the device led light should turn ...

• Nexx Plug NXPG-100W - Can we share access with Nexx Plug ?

  Yes, users can also share access to Nexx Plug similar to Nexx Garage.