Nexx Garage NXG-200 - Will Nexx Garage NXG-200 work without internet connection?
Yes, even if your home WiFi network went down / temporarily lost internet connection and both your phone and the Nexx device has no internet connection, the Nexx Home app will still be able to activate the device over Bluetooth.
Make sure that your phone is within Bluetooth range of the device, and then tap the button on the app to activate the door.
Related Articles
Nexx Garage - NXG-200, NXG-100 - How to clone your garage door or gate remote with Nexx Adapter for incompatible openers
STANDARD PROGRAMMING STEPS Note : “Source Remote” = The original or universal remote you currently use on the Door or Gate. If the following steps are carried out near the opener, the remote control will activate your garage door during programming. ...
Nexx Garage NXG-200, NXG-100 - Troubleshooting Connection Issues
• If you are using a Samsung or a Pixel phone there is a feature where it will block access to a WiFi network that does not have internet access and will turn on your mobile data instead. Once you connect to the Nexx Garage WiFi if you get a prompt ...
Nexx garage NXG-100 - Gate Use with Nexx Garage
Nexx Garage can be used with gates that have one switch to open and close. This behavior is similar to a garage door opener. However, some gates have a switch for open, a switch for stop, and a switch for close, and these gates will not work with ...
Nexx Garage, Nexx Home App - Auto Open "Just Drive" troubleshooting
1. Uninstall the Nexx Home app. Then reboot your phone to clear out the cache, and then reinstall from the Apple App/Google Play Store. 2. Set Privacy and Location settings for your phone operating system as follows: For iOS devices: Enable Motion ...
Nexx Garage NXG-200, NXG-100 - What to do when you switch to the Nexx Garage WiFi and it shows "Connected, No Internet"
When doing the setup and you see this message on your phone, all you need to do is: For Android: Check for any notifications asking you if you want to stay connected and make sure you select "stay connected'. Then go back to the Nexx Home app to ...