Nexx Garage - NXG-200 - Replacing the battery for Nexx Garage NXG-200 wireless sensor
When both LED lights are on, the battery on the wireless sensor needs to be replaced. The Nexx Home app will also notify you when the battery of the wireless sensor is low.
To replace the battery, pull down the bottom to reveal the battery compartment. Replace the battery with one 23A 12V Alkaline battery.
Related Articles
Nexx Garage - NXG-200 - Is the wireless sensor battery covered under warranty?
The battery of the wireless sensor for Nexx Garage NXG-200 is not covered under warranty because it is a consumable part. The wireless sensor uses a 23A 12V Alkaline battery that can easily be found at any local store or on Amazon.Nexx Garage NXG-200 - Troubleshooting WIRELESS sensor (Wireless sensor showing incorrect status)
If the door status on the Nexx Home app is showing incorrect door status or "Unknown Status", then there may be an issue with the sensor. The app uses the sensor to determine if the door is opened/closed, and if the sensor isn't correctly reporting ...Nexx Garage NXG-200 - Pairing and installing the wireless sensor
Pairing and installing the wireless sensor Before pairing the sensor, check the following below first: Make sure that the device is online and connected to WiFi. The light on the device should be solid blue indicating the device is connected to ...Nexx Garage NXG-200 - What type of battery does the Wireless Sensor use and when should we replace the battery?
The wireless sensor uses a 23A 12V Alkaline battery. If both LED lights on the sensor are on, this means the battery needs to be replaced. Also, the Nexx Home app will warn the user if the wireless sensor battery is low.Nexx Garage NXG-200 - Using WIRED SENSOR instead of WIRELESS SENSOR
You can use WIRED sensor in place of the WIRELESS sensor that Nexx Garage NXG-200 comes with by default. If you prefer to use WIRED sensor instead of WIRELESS sensor, the following are the options: 1) Purchase NXG-200 WIRED sensor from NEXX Store: ...