Nexx Alarm - NXAL-100 - What is the default installer code for enabling keypad address?
* ONLY FOR Honeywell / Ademco / ADT / Safewatch / First Alert Systems
The default installer code is 4112. If that does not work, you may have to reset your installer code.
To reset your alarm system installer code, please refer to your alarm system manual or follow the instructions in this video to reset your installer code:
Related Articles
Nexx Alarm - NXAL-100 - Setup and Configuration
1. See the Checklist below before starting A compatible, working alarm system: 1) Check Compatible Alarms 2) Your existing alarm has to be in working condition - that is you can arm/disarm with your alarm code and that there is no periodic beep ...
Nexx Alarm - NXAL-100 - Programming Keypad Address for Vista 128B
Attached is the guide to programming a keypad address for the Vista 128 B which has different instructions than the other Vista panels. The Vista 128B can be assigned 0 - 30 addresses. 1. Enter Program Mode, Installer code (4140) + 8 + 0 + 0 + 0 ...
Nexx Alarm - NXAL-100 - How to Activate a Keypad Address for Honeywell Vista Panels
How to Activate a Keypad Address for Honeywell Vista Panels (10p, 15p, 20p, & 21p) These panels have keypad addresses from 16 – 23 Keypad address 16 is factory enabled and cannot be disabled. Reserve this address for physical keypads. Keypad Entry ...
Nexx Alarm - NXAL-100 - Difference between alarm system codes
Most alarm systems will have different codes that you should be familiar with. For everyday use, it shouldn't be an issue, but if you are planning on changing your alarm settings or configuration, then this is something that you should know. Each ...
Nexx Alarm - NXAL-100 - Steps to Use Pro Plan Offer Code
[APPLICABLE TO ONLY KICKSTARTER SUPPORTERS WHO PAID THE $1 RESERVATION FEE] STEPS TO USE PRO PLAN OFFER CODE 1. Using Nexx Home mobile app, register Nexx Smart Alarm. 2. Use the mobile app to enter the Pro Plan coupon code: Menu icon (3 little ...