Nexx Alarm - NXAL-100 - How to connect Nexx Alarm to the alarm panel?

Please check out these connection videos here:

https://getnexx.com/pages/videos-nxal-100

**MAKE SURE TO DISCONNECT AC POWER AND BATTERY FIRST BEFORE PROCEEDING**

For DSC alarm systems: 

Black wire ---> "BLK" or "AUX -"

Red wire ---> "RED" or "+ AUX"

Green wire ---> "GRN"

Yellow wire ---> "YEL"

For Honeywell / Ademco / ADT / Safewatch / First Alert:

Black wire ---> 4

Red wire ---> 5

Green wire ---> 6

Yellow wire ---> 7

• Related Articles

• Nexx Alarm - NXAL-100 - Setup and Configuration

  1. See the Checklist below before starting A compatible, working alarm system:  1) Check Compatible Alarms   2) Your existing alarm has to be in working condition - that is you can arm/disarm with your alarm code and that there is no periodic beep ...

• Nexx Alarm - NXAL-100 - Best place to install Nexx Alarm

  For good WiFi connection, using the included Velcro tape, attach the Nexx Alarm device on the exterior of the alarm panel enclosure. Note: make sure you have enough space below the Nexx Alarm device in case you need to reset it in the future.

• Nexx Alarm - NXAL-100 - Nexx Alarm box contents

  Nexx Alarm's box contents include: Nexx Alarm Controller Installation Manual  Connecting Cable Velcro tape   

• Nexx Alarm - NXAL-100 - Power requirement

  The Nexx Alarm device uses 12v power, which is supplied by the alarm panel itself. 

• Nexx Alarm - NXAL-100 - Nexx Alarm Online/Offline Notification

  Nexx Alarm will notify you via push notification when the device goes offline/online. The offline message could be either due to a power loss or internet connection loss.  Once power or internet is back on, the Nexx Alarm device will reconnect, and ...