Perform this test to verify if the sensor is working correctly:
1. Connect the sensor to the Nexx Garage device.
2. Power on the device.
3. Take the sensors, one in each hand, and touch them together while looking at the device. The green led light should blink.
4. Separate the sensors and the green led light on the device should blink again.
5. Anytime you touch and separate the sensor, the led light should always blink.
If you do not see a blinking light by performing the steps above, please try these steps to make sure the device is working properly:
1. Disconnect the sensor cable from the Nexx Garage device.
2. Power on the device.
3. Look inside the red sensor connector coming out of the device. There should be 2 pins in it. Short the 2 pins using a small metal tool like a flat head screwdriver.
4. When you short the 2 sensor connector pins, the led light on the device should flash.