Nexx Garage - NXG - How to reset the device back to configuration mode?

• Related Articles

• Nexx Garage - NXG-200 - No devices found in configuration mode error

  If you get an error saying there are "no devices found in configuration mode", follow the steps below to resolve it: 1. First, delete the device from the Nexx app. On the main screen in the Nexx app, go to the Device Settings page (tap the gear ...

• Nexx Plug NXPG-100 - How to reset the Nexx plug back to configuration mode?

  Please follow the steps below to reset Nexx Plug back to the configuration mode: 1. Press and hold down the on/off button for 15 to 20 seconds or until the LED light turns solid Blue. 2. After that, go back into the Nexx Home App and start the set up ...

• Nexx Garage - NXG-200, NXG-100 - How to clone your garage door or gate remote with Nexx Adapter for incompatible openers

  STANDARD PROGRAMMING STEPS Note : “Source Remote” = The original or universal remote you currently use on the Door or Gate. If the following steps are carried out near the opener, the remote control will activate your garage door during programming.  ...

• Nexx Garage - NXG-100 - Hard Reset / Reset to Factory settings

  Try the following steps to perform the hard reset: 1.  Unplug the device for 30 seconds. 2.  Press and hold the reset button while plugging the device in. 3.  Continue to hold the reset button for 5-10 seconds after plugging the device in. 4.  ...

• Nexx Garage - NXG-200, NXG-100 - Device not responding when using the Nexx Home app

  If your Nexx Garage device is not responding when you try to control it with the Nexx Home app, follow the steps below to resolve the issue: 1. Check the LED light on the device and make sure it's not blinking. 2. Restart the device by unplugging the ...