Nexx garage NXG-100 - Firmware update issue
If the firmware is taking a long time to update or if it's not updating, please log out and log back in and try again.
If you have a weak WiFi signal, you may need to have the device closer to the router or have a WiFi extender to get a stronger signal.
Nexx Garage - NXG-200 - How to update firmware
1. Open Nexx Home, tap Settings, then tap Device Info. Tap on the Local Firmware update link. Once the link is tapped, an orange LED light should show indicating the device in config mode. 2. Go to the mobile device WiFi list, and there should be an ...
Latest device firmware for Nexx Garage NXG-100, Nexx Garage NXG-200, Nexx Plug NXPG-100, and Nexx Home app versions
As of 8/14/2020 the current latest firmware version numbers are as follows: NXG-100 - 3.3.19 NXG-200 - 3.0.2 NXPG-100 - 4.0.0 Nexx Home iOS - 3.0.3 App Store Link - https://apps.apple.com/us/app/nexx-home/id1434697309 Nexx Home Android - 3.0.3 Google ...
Nexx Garage - NXG-200, NXG-100 - How to clone your garage door or gate remote with Nexx Adapter for incompatible openers
STANDARD PROGRAMMING STEPS Note : “Source Remote” = The original or universal remote you currently use on the Door or Gate. If the following steps are carried out near the opener, the remote control will activate your garage door during programming. ...
Nexx garage NXG-100 - Sensor Notification Issues - Steps to Resolve
Below are the steps to resolve sensor notification issues: For existing installation where the sensor has already been installed: 1) Manually refresh the door status by pulling down on the App button screen. Does your door status show the correct ...
Nexx Garage - NXG-200, NXG-100 - Device not responding when using the Nexx Home app
If your Nexx Garage device is not responding when you try to control it with the Nexx Home app, follow the steps below to resolve the issue: 1. Check the LED light on the device and make sure it's not blinking. 2. Restart the device by unplugging the ...