Does Nexx devices require WiFi connection?

• Related Articles

• Nexx Garage NXG-100, NXG-200, Nexx Gate - WiFi Disconnect

  If your device has lost WiFi connection, it will normally reconnect, but if it doesn't then please recycle the power as follows: Unplug the power for the Nexx device, wait 5 seconds, and plug the power cord back into the outlet.  Also, check to see ...

• Nexx Garage - NXG-200 - Configuration tips for fast blinking blue LED connection issue

  First make sure that you are connecting the Nexx device to a 2.4 Ghz WiFi network, as Nexx will not connect to a 5 Ghz network. After tapping "Configure Device", you will need to wait a few minutes for the device to try and connect to WiFi before ...

• Nexx Garage NXG-100 - WiFi Configuration Change due to WiFi Network Change

  If your WiFi network changes, you will need to change your device WiFi configuration. Steps to change WiFi Configuration: 1. Make sure you are on your home 2.4 G WiFi network. 2. Make sure that your device LED light is solid green.  If it's not, then ...

• Nexx Garage - NXG-200 - No devices found in configuration mode error

  If you get an error saying there are "no devices found in configuration mode", follow the steps below to resolve it: 1. First, delete the device from the Nexx app. On the main screen in the Nexx app, go to the Device Settings page (tap the gear ...

• Nexx Garage NXG-200 - Will Nexx Garage NXG-200 work without internet connection?

  Yes, even if your home WiFi network went down / temporarily lost internet connection and both your phone and the Nexx device has no internet connection, the Nexx Home app will still be able to activate the device over Bluetooth.  Make sure that your ...